| |
|
|
PRICE LIST :
AMPLIFIERS FOR SERVOVALVES
Single Channel
The model 851019 is a 6.5 x 4.5 printed circuit card with edge connections which accepts three inputs or feedbacks and drives one channel. The circuitry is illustrated on the Flyer. The electrical power required is 40 ma @ +/-12 to 15 vdc. The price is $544.
The model 9504 is 5.4" x 4" printed circuit board which is standoff mounted and has a terminal strip for connections along one side. The two input commands are summed and have adjustments for the maximum increase and decrease rates and scaling. The feedback signal can be differential or single ended. The high impedance output has adjustable current limiting. The GAIN, INT & BAL adjustments are functionally the same as the 851019C. Color coded test points allow easy access to pertinent signals. The electrical power required is 40 ma @ +/-12 to 15 vdc. The price is $667.
Dual Channel
The model 900500 is a 6.5 x 4.5 printed circuit card which accepts three inputs or feedbacks per channel and drives two servovalves. The circuitry is the same as the 851019C except that a dither oscillator with amplitude control is added. The electrical power required is 70 ma @ +/-12 to 15 vdc. The price is $755.
Accessories
Mating connector with solder connections for 851019C or 900500: PN 900630: $16
Card holder for 851019C or 900500 which provides screw clamp terminations: PN 900620: $137
AC to DC Converter; open frame: PN 900610: $91
Rack For Up To Fifteen Channels
The Model 8801 is 19 wide, 5.25 high and 9 deep. There is a flyer for this product. The rack accepts up to fifteen single channel servoamplifiers, Model number 851019. Connections to the backplane are through separable screw clamp terminations. Test points are provided on the card edge for valve current and feedback. An extender board is provided for access to the board mounted adjustments. The unit can accommodate a variety of AC voltages at 50 or 60 Hz. The price of the rack with no servoamplifiers is $1,610.
Rack For Up To Thirty-Two Channels
The Model 9203 is 19 wide, 5.25 high and 9 deep. It is similar in construction to the 8801. The rack accepts up to sixteen dual channel servoamplifiers, Model number 900500. Test points are provided on the card edge for valve current and feedback. An extender board is provided for access to the board mounted adjustments. The unit can accommodate a variety of AC voltages at 50 or 60 Hz. The price of the rack with no servoamplifiers is $4,235.
Three Stage Valves
The model 8804 has an on board AC to DC converter, LVDT signal conditioning, and various options for feedbacks. Both the amplitude and frequency of the dither oscillator are adjustable. There is a breadboard area to accommodate special circuitry. It will fit into a snaptrack or can be standoff mounted. Screw clamp terminals are provided for all connections. The price is $2,321.
Specials
If there are special requirements that the above standard products dont satisfy, we can usually accommodate them. Quite often the standard product can be modified to provide additional features in a cost effective manner.
RDN/pn
|
SCHEDULE OF FIELD SERVICE ENGINEERING RATES
CHARGES FOR SERVICE ENGINEER
For troubleshooting, repairing, supervision of installation, or reconditioning of machine or instrument in customer's facility:
1. 8 hour day except weekends and holidays .............. $1,400.00
2. Straight time hours ................................................ 175.00 /hr
3. Time in excess of 8 hours and Saturdays .............. 262.50 /hr
4. Sundays and holidays ........................................ 350.00 /hr
5. Minimum Service Time charge (4 hours) ....................... 700.00
TRAVEL EXPENSE
1. Travel time from person's home or office to plant .... $87.50 /hr
2. Travel in personal or company car ............................... .50 /mi
3. Travel by commercial transportation, taxi, rental car etc. . actual $
4. Daily meal allowance ............................................. $65.00 /day
5. Hotel, tolls, etc. ...................................................... actual $
WEEKEND EXPENSE
1. When the service engineer is obliged to spend a non-working weekend day away from home, an additional $300.00 is charged.
2. When a job lasts for several weeks the customer will be charged for travel time and transportation for the engineer to return home every second weekend.
FORM FS 2001
|
|
|
